China factory manufacturer Customized EPDM O-rings
Brand XST SEALS
Product origin XIAMEN
Delivery time 10-30 Days
Supply capacity 5000 MOLDS
Customized size or color for your required EPDM Orings EPDM is acceptable for temperature applications between -70 degrees F (-57 degrees C) to 300 degrees F (149 degrees C). It is compatible for use with water and steam, silicone oil and grease, polar solvents (alcohols), acids, glycol-based brake fluids, ozone, and weathering. It is vulnerable to many oils, gasoline, and solvents. This material meets ASTM International standards
Ethylene propylene rubber (EPDM,EPR)
An excellent material for sealing water, steam, and glycol’s / brake fluids with a temperature range of -50°C to +150°C (depending on compound)
The vinyl rubber O-ring (EPDM) has high weather resistance Characterized by a high resistance to abrasion, resistance to steam,aging and atmospheric agents, this compound finds specific uses where a decent operating temperature range is needed.resistant to non-mineral oils, fluid brakes cars,resistant to polar fluids, aging, water, and operates in the temperature range of -50 ° C to +150 ° C (hot steam to +180 ° C). EPDM products are not resistant to mineral oil. Mineral oils and fats, as well as animal and vegetable oils and fats, contribute to unacceptably strong swelling. EPDM ring is resistant to a large number of organic and inorganic bases and acids It works well in hot water and steam (it is recommended to lubricate with silicone grease before installation).
EPDM rings are black with hardness of 60,70,80.
EPDM O-Rings have a high resistance to ozone, and sunlight.EPDM Peroxide cured.For hot water, vapor, alcohols, ketones, engine coolants, organic,automotive brake and cooling systems, water applications,inorganic acids and bases. It has excellent electrical insulating properties. and also has good resistance to ketones, ordinary diluted acids, and alkaline.
EPDM O Rings have good resistance to hot water, steam, detergents, caustic potash solutions and silicone oils and greases and can be used with some diluted acids and chemicals. EPDM should not be used with most mineral based products.
We also stock materials such as Nitrile, Viton, Silicone, EP, Neoprene, Polyurethane and many more.
O-Ring sizes are defined by the inner diameter-ID and the cross section-CS , our o-ring Inner Diameter can be customized from 0.5mm to 800mm. Welcome contact us for the customization.
